Air Duct Cleaning in Burbank - Flat Price Per System, No Per-Vent Upsells

Fast, Reliable Air Duct Cleaning Across Burbank

Air duct cleaning in Burbank typically runs $350 – $575 for a full system on a standard single-family home, and most jobs are finished in 4 to 6 hours. Burbank’s dust problem is real: the Verdugo Mountains sit upwind, the 5 and 134 freeways sit at your door, and homes built in the 1940s through 1960s have ductwork that was never designed to handle that much silt. Our crews work Burbank neighborhoods weekly, so we know exactly what to expect when we open a duct here. Call (626) 469-5477 for a written, no-pressure quote before any work starts.

Call (626) 469-5477

Why Hollis Air Duct Pasadena Is Burbank’s Preferred Air Duct Cleaning Company

Burbank homeowners deal with a specific kind of duct problem: old metal, fine canyon dust, and sealant that dries out in Santa Ana winds. We see it in Magnolia Park bungalows, on the hillside off Bel Aire Drive, and in the Rancho Equestrian district. Our Air Duct Cleaning team shows up uniformed, background-checked, and carrying professional-grade equipment from Rotobrush and Nikro, not hardware-store gear. The job is picked by Garrison Standard rules, which means the price is written before we touch a single register, and the 365-Day Done Right Promise is in writing on every job. If the work fails within a year, we return and make it right at no charge, including a free second visit. That is not a verbal promise; it is on paper.

Roy Castellanos runs our Burbank-area operations with a simple expectation: arrive inside the quoted window, price the job before starting, do the work by the book, and leave the site cleaner than we found it. We answer the phone with a live person 24 hours a day, seven days a week. No voicemail loops. When Burbank homeowners call about dust blowing from their registers or a dry, musty smell when the heater kicks on, they get a real conversation and a straight answer about what we will do and what it will cost.

Air Duct Repair in Burbank

Air duct repair in Burbank becomes necessary when the original galvanized steel ductwork from the 1940s through 1960s starts to fail, and it is a job we take on routinely in this city. The seams and joints on that old metal corrode over decades, creating leaks that pull dust from crawlspaces and attics right back into the system within months of a cleaning. In Burbank, air duct repair typically costs $175 – $450 per affected section, depending on access and the extent of the corrosion, and we quote the full price before any work begins.

Reconnecting and Sealing Corroded Runs

When an old galvanized steel duct separates at a seam, cleaning alone will not fix the airflow problem. We find the disconnected sections with a video inspection, reconnect the metal, and apply mastic sealant at the joints. In the Rancho Equestrian district, our crew found a gray, fibrous mat caked on the return grilles of a 1950s home, horse hair and arena dust mixed with decades of silt. We ran a camera inspection down the original galvanized steel supply runs and found several disconnected sections where the metal had corroded, so after source removal with HEPA-filtered negative pressure, we sealed and reconnected the runs, restoring airflow to the master bedroom.

Rust and Pinhole Leaks in Supply Ducts

Burbank’s low humidity can crack old duct sealant, and that is when pinhole leaks begin pulling unfiltered air into the system. We repair these with Abatement Technologies mastic and, where needed, wrap compromised sections, which is part of our Duct Sealing in Burbank service. This is not patchwork; it is correcting the same failure point that will keep re-contaminating the ducts if left alone.

Ductwork Cleaning in Burbank

Ductwork cleaning in Burbank homes means source removal, not just brushing the visible parts. That matters here because the fine, silty dust from the Verdugo Mountains and freeway corridors settles deep in supply and return runs. A standard single-family home in Burbank typically costs $350 – $575 for full ductwork cleaning, with larger hillside properties running higher because of the longer, harder-to-access runs. We use a negative-air machine with HEPA filtration to pull contaminants out of the system while running a rotary brush through the supply and return ducts.

Supply and Return Duct Cleaning

Supply ducts push air into the rooms; return ducts pull it back to the HVAC unit. Both need cleaning, but the return side in Burbank tends to cake with that fine gray dust because it runs under negative pressure and picks up whatever the home is shedding. We clean both sides to the same standard, using negative-air containment so the dust we remove does not end up on your furniture.

Full System Cleaning with Video Inspection

After the cleaning is finished, we run a camera through the main trunk and branch lines to show you what the inside of the ductwork looks like. That matters in Burbank because a duct that looks clean at the register can still be packed with silt forty feet in. The video shows whether the run is clear and whether we found any disconnects or blockages along the way.

Trusted Brands We Service in Burbank

Burbank homes have a mix of older galvanized steel and newer flexible ductwork, so we stock supplies that fit both. We work with filtration and equipment brands like Aprilaire, Guardsman, and Rotobrush, and we know how those systems behave in Burbank’s dry, dusty conditions. If your Aprilaire filter housing is cracked or a Rotobrush intake is clogged with silt, we can usually address it the same day we are on site. We do not push replacement where a clean and a seal will fix the problem, but when a section is too far gone, we quote the replacement in writing before any work begins.

Common Air Duct Cleaning Problems We See in Burbank Homes

• Verdugo Dust and Freeway Silt in Supply Runs. Homes directly downwind of the Verdugo Mountains and adjacent to the 5 and 134 freeways build up a visible layer of fine, silty dust faster than in neighboring Glendale or North Hollywood. That silt gets pulled into the return side and works its way through the entire system, coating the inside of supply ducts within months of a cleaning.
• Corroded Galvanized Steel Ducts in 1940s – 1960s Homes. Burbank’s housing stock is dominated by single-family homes from that era, and the original galvanized steel ductwork is now 60 to 80 years old. Seams and joints corrode, creating leaks that pull crawlspace and attic dust back into the cleaned system.
• Dry, Cracked Sealant from Santa Ana Winds. The hot, dry Santa Ana winds in fall and low humidity overall cause duct sealant to dry out and crack. Those cracks let dusty canyon air bypass the filter and coat the inside of supply ducts, which is a major reason Burbank homeowners feel like their ducts are dirty again soon after a cleaning.
• Hillside Duct Runs Skipped by Less Thorough Cleaners. The long, hard-to-access duct runs in Burbank’s hillside properties are often bypassed by crews who clean only the first few feet of accessible duct. The deepest sections stay packed with Verdugo silt and re-contaminate the rest of the system within weeks.

Pricing for Air Duct Cleaning in Burbank, CA

We Also Serve Cities Near Burbank

Beyond Burbank, our crews regularly work Burbank-adjacent cities including Glendale, Altadena, Pasadena, and Alhambra. The duct problems differ slightly by neighborhood, but the standard stays the same: written price, background-checked technicians, and the 365-Day Done Right Promise on every job.

FAQs About Air Duct Cleaning in Burbank